Epoxy flooring with a gray flake finish in a Houston, TX garage

HOUSTON EPOXY FLOORING COMPANY

Epoxy Flooring in Houston, TX

Free on-site estimates · Diamond-ground prep

Get My Free Estimate

Epoxy flooring in Houston for garages, homes, patios and shops, installed over concrete we test for moisture and grind first. Free on-site estimates from our office on the West Sam Houston Parkway.

Get a Free Epoxy Flooring Estimate

  • Moisture Test First

    Every slab is checked before it is coated.

  • Diamond-Ground Prep

    We open the concrete so the coating bonds.

  • Homes and Businesses

    Garages, patios, pool decks, shops and warehouses.

  • Open 24/7

    Call or send the form any time.

AT A GLANCE

Epoxy Flooring in Houston: What It Costs and How Long It Takes

Epoxy flooring in Houston costs about $2 to $12 per square foot at market rates, and a two-car garage usually takes one to two days on site. Those are market ranges, not a quote.

Flake systems, the usual choice for Houston garages, run about $4 to $7 per square foot in the same data. Removing an old coating adds about $1 to $2 per square foot. The slab condition, the system and the size of the floor decide where a project lands.

Houston Epoxy Flooring at a Glance

Market range
$2 to $12 per sq ft
Flake garage system
$4 to $7 per sq ft
20x20 garage with flake
About $1,600 to $2,800
Time on site
1 to 2 days for most garages
Walk on it
About 24 hours (epoxy), a few hours (polyaspartic)
Park on it
About 72 hours (epoxy), about 24 hours (polyaspartic)

Market ranges, not a quote. Source: HomeGuide, Houston epoxy flooring cost data, 2026. Cure times are typical and change with the product, heat and humidity.

See the Houston epoxy flooring cost guide

FIND YOUR FLOOR

Which Epoxy Floor Fits Your Houston Garage, Patio or Shop?

For a Houston garage, the best fit is flake epoxy with a polyaspartic topcoat. Pool decks and patios need a UV-stable polyaspartic with texture, interiors suit metallic epoxy or polished concrete, and shops need commercial epoxy. CT Epoxy Flooring Houston matches the system to what the floor has to handle.

  • Gray and black flake garage floor coating in a Houston, TX home

    Garage

    Handles: Hot tires, oil, road grit, humidity

    Best fit: Flake epoxy with a polyaspartic topcoat

    Garage floor coating
  • Resurfaced light tan pool deck around a backyard pool in Houston, TX

    Pool deck or patio

    Handles: Sun, heat, wet bare feet

    Best fit: UV-stable polyaspartic with a slip-resistant texture

    Pool deck resurfacing
  • Silver and charcoal metallic epoxy floor in a Houston, TX living room

    Home interior or showroom

    Handles: Looks, foot traffic, easy cleaning

    Best fit: Metallic epoxy or polished concrete

    Metallic epoxy floors
  • Gray commercial epoxy floor with yellow safety lines in a Houston, TX warehouse

    Warehouse, shop or kitchen

    Handles: Forklifts, chemicals, washdowns

    Best fit: Commercial epoxy with safety striping

    Commercial epoxy flooring

Not sure between the two main coatings? Our comparison sets epoxy and polyaspartic side by side for Houston heat and humidity.

Read epoxy vs polyaspartic

OUR SERVICES

Epoxy Flooring Services in Houston

CT Epoxy Flooring Houston offers six floor services in Houston, each with its own page on systems, prep and cost.

  • Gray and black flake garage floor coating in a Houston, TX home

    Garage Floor Coating

    Flake epoxy and polyaspartic garage floors built to handle hot tires, oil drips and Gulf Coast humidity.

    Learn more
  • Clear polyaspartic topcoat over a tan flake floor in a Houston, TX garage

    Polyaspartic Floor Coating

    Fast-curing, UV-stable polyaspartic coatings for garages, patios and shops that need to be back in use quickly.

    Learn more
  • Silver and charcoal metallic epoxy floor in a Houston, TX living room

    Metallic Epoxy Floors

    Poured metallic pigments that give a home, showroom or office floor a pearl, marble or wave look.

    Learn more
  • Gray commercial epoxy floor with yellow safety lines in a Houston, TX warehouse

    Commercial Epoxy Flooring

    Chemical-resistant epoxy floors for warehouses, shops, commercial kitchens and retail, with safety striping.

    Learn more
  • Resurfaced light tan pool deck around a backyard pool in Houston, TX

    Pool Deck Resurfacing and Patio Coatings

    Slip-resistant, UV-stable finishes over cracked, faded or Kool Deck pool decks and patios.

    Learn more
  • Polished concrete floor with a high shine in a Houston, TX showroom

    Concrete Polishing

    Ground, densified and polished concrete with a low-maintenance shine for homes, offices and retail floors.

    Learn more
See all epoxy flooring services

BUILT FOR HOUSTON CONCRETE

How We Prepare Houston Concrete for an Epoxy Floor

CT Epoxy Flooring Houston tests every slab for moisture, grinds it with diamond tooling and repairs cracks before any coating goes down. Houston concrete brings three problems that make a poorly prepared floor peel.

Diamond grinder and a filled crack on a garage slab in Houston, TX

Humidity on Install Day

Houston air stays humid for most of the year. A coating applied to a slab close to the dew point can cloud or lose its bond. CT Epoxy Flooring Houston checks air temperature, humidity and slab temperature before mixing, and moves the install day when the readings are wrong.

Moisture Coming Up Through the Slab

Most Houston homes sit on slab-on-grade foundations, and moisture from the ground can rise through the concrete. That moisture pushes a coating off from below. CT Epoxy Flooring Houston runs a moisture test first and uses a moisture-blocking primer when the reading calls for it.

Cracks From Expansive Clay Soil

Houston's clay soil swells when it is wet and shrinks when it dries, which moves foundations and cracks garage slabs. CT Epoxy Flooring Houston fills and bridges cracks, removes failed coatings and grinds the surface flat before coating.

FINISHES

Flake, Metallic, Solid Color and Polished Concrete Finishes in Houston

CT Epoxy Flooring Houston installs four floor finishes in Houston: flake epoxy, metallic epoxy, solid color epoxy and polished concrete.

  • Close-up of a gray and black flake epoxy floor in Houston, TX

    Flake Epoxy

    Vinyl color flakes broadcast into the base coat hide dust and small flaws and add grip underfoot. Flake is the usual choice for garages.

  • Close-up of a pearl and charcoal metallic epoxy floor in Houston, TX

    Metallic Epoxy

    Metallic pigments worked by hand create a pearl, marble or wave look, so no two floors match. Metallic suits homes, showrooms and offices.

  • Close-up of a solid gray epoxy floor with anti-slip texture in Houston, TX

    Solid Color Epoxy

    One even color, often gray or tan, with an optional anti-slip additive. Solid color fits workshops, utility rooms and commercial floors.

  • Close-up of a polished concrete floor with exposed aggregate in Houston, TX

    Polished Concrete

    Polished concrete skips the coating: the slab itself is ground, hardened with a densifier and polished until it shines. It fits interiors and shops that want a low-maintenance floor.

HOW IT WORKS

Our 4-Step Epoxy Floor Installation Process in Houston

CT Epoxy Flooring Houston installs an epoxy floor in four steps: test the slab, grind and repair, coat, then cure and walk through it with you.

  1. 1. Test the Slab

    At the free estimate we measure the floor, test it for moisture and look at cracks and old coatings.

  2. 2. Grind and Repair

    Diamond grinding opens the concrete, and cracks and pits are filled so the surface is sound.

  3. 3. Coat

    Base coat, flake or metallic layer and a clear topcoat go down when humidity and temperature are in range.

  4. 4. Cure and Walk-Through

    We go over the cured floor together and give you the times for foot traffic and for parking.

WHERE WE WORK

Epoxy Flooring Near Houston: Towns We Serve

CT Epoxy Flooring Houston installs epoxy and polyaspartic floor coatings for garages, homes and businesses in Houston, Texas, from its office on the West Sam Houston Parkway South. It is open 24 hours a day, 7 days a week.

CT Epoxy Flooring Houston also serves seven nearby towns, from Stafford next door to Cypress in northwest Harris County. Distances are straight-line miles from the office.

See all service areas

CT Epoxy Flooring Houston

9555 W Sam Houston Pkwy S, Ste 130
Houston, TX 77036
(832) 536-1307

Open 24/7

Get directions

QUESTIONS

Epoxy Flooring Questions from Houston Owners

At the Houston market range of $2 to $12 per square foot, 1,000 square feet of epoxy flooring comes to about $2,000 to $12,000. The system, the prep and the slab condition decide where a Houston floor lands in that range. Those are market ranges, not a quote.

Houston epoxy flooring cost guide

A 20x20 garage is 400 square feet, so a flake epoxy floor at the Houston market range of $4 to $7 per square foot comes to about $1,600 to $2,800. Removing an old coating adds about $1 to $2 per square foot. Those are market ranges, not a quote.

See garage floor coating

Epoxy gets slippery when wet without an anti-slip additive, and standard epoxy can yellow in direct sun. In Houston, the bigger risk is poor prep: a coating over a damp or unground slab can peel. CT Epoxy Flooring Houston adds texture where floors get wet and uses UV-stable topcoats outdoors.

Yes, on the day of the install. High humidity and a slab near the dew point can cloud the finish or weaken the bond. CT Epoxy Flooring Houston checks humidity and slab temperature before coating and reschedules when conditions are wrong.

Most epoxy floors are ready for foot traffic in about 24 hours and for cars in about 72 hours. Polyaspartic topcoats cure faster: often walkable in a few hours and ready to park on in about a day. Times change with the product, heat and humidity in Houston.

Polyaspartic is usually the better topcoat for a Houston garage, because it is UV-stable and cures in about a day. Epoxy is a strong, lower-cost base coat. Many garage systems use both: an epoxy base with a polyaspartic topcoat.

epoxy vs polyaspartic

Hot tire pickup happens when a thin coating softens under hot tires and sticks to the rubber. A ground slab and a full system with a polyaspartic or polyurethane topcoat resist it. CT Epoxy Flooring Houston grinds every garage slab before coating for that reason.

Yes. CT Epoxy Flooring Houston installs epoxy flooring in Stafford, Bellaire, Sugar Land, Missouri City, Katy, Fulshear and Cypress, as well as across Houston. Each town has its own page with local details.

See all epoxy flooring questions

FREE ESTIMATE

Request an Epoxy Flooring Estimate in Houston

Tell us about the floor, and CT Epoxy Flooring Houston will set up a free on-site estimate in Houston or a nearby town.

Tell Us About Your Floor

CallFree Estimate