GUIDE

How to Choose an Epoxy Flooring Company in Houston

An epoxy flooring company in Houston is only as good as its prep. Ask how they grind the slab, whether they test for moisture and what goes into each coat, then compare written estimates line by line.

Updated:

Choosing an epoxy flooring company in Houston, TX: a moisture meter on a ground garage slab

Questions to Ask an Epoxy Flooring Company

  • Do you grind the slab or acid etch it?
  • Do you test the slab for moisture, and what happens if it reads high?
  • How do you repair cracks before coating?
  • What base coat and topcoat do you use, and how many coats?
  • How do you handle humidity and temperature on install day?
  • When can I walk and park on the floor?
  • Is everything in a written estimate?

Red Flags in an Epoxy Flooring Quote

  • A price over the phone without seeing the floor
  • No mention of grinding or moisture testing
  • One-coat systems sold as a full garage floor
  • No written estimate, or one with a single total and no line items
  • Pressure to sign the same day

In Houston, the most common failure is a coating that lifts at the tire lines because it went over an unground or damp slab. The questions above catch that before you pay.

How to Compare Written Estimates

Put the estimates side by side and check that each one lists the square footage, the prep steps (grinding, crack repair, primer), the products and number of coats, and the cure times. A lower price that leaves out a prep step is not the same job.

For market context, Houston epoxy flooring runs about $2 to $12 per square foot installed (HomeGuide, 2026). Market ranges, not a quote.

What to Check on Install Day

  • The floor is ground from wall to wall, not just in the middle
  • Cracks are filled and flush before the base coat
  • The crew checks air and slab temperature and humidity
  • You get written walk and park times when the job is done

How CT Epoxy Flooring Houston Works

CT Epoxy Flooring Houston answers every question on this page in writing. We grind every slab, run a moisture test, repair cracks, check conditions before mixing and give you a line-item estimate after a free visit. Our office is at 9555 W Sam Houston Pkwy S, Ste 130, and we are open 24/7.

Frequently Asked Questions

Grind. Diamond grinding opens the concrete evenly and removes old sealers; acid etching is less reliable on Houston garage slabs.

Two or three written estimates are enough to compare prep, products and price.

Ask how they handle humidity on install day and moisture coming up through slab-on-grade foundations. A clear answer to both is a good sign.

Source for the market range: HomeGuide, Houston epoxy flooring cost data (2026).

Get a Free Written Estimate

Ask us these questions at a free estimate, and get the answers in writing.

CallFree Estimate